Products
-
DIRECT DIVIDING HEAD
Type F2 super spacer is designed for using and indexing in both horizontal and rertical position.It is the most optimum in use for milling machines,grinding machine,drilling machine and planer etc.The divinsions in 2,3,4,6,8,12,24 are permitted by motched plate,any desired angular in-dexing can be performed too by using a graduated ring on the spindle and a verner. -
CUTTER GRINDER COLLET
Item No d mm in 561237 2.5-16 1/8-5/8 -
R8 TO MT ADAPTER
Item No Inside MT.No. L Item No Inside MT.No. L 561501 1 114 561501 1 114 561503 2 127 561503 2 127 561505 3 153 561505 3 153 -
R8 COLLET
Item No Clamping range 561101 Round Hole d 1-22mm 3/64″-7/8″ 561103 Hexagonal Hole H 3-19mm 1/8″-3/4″ 561105 Square Hole S 3-14mm 1/8″–9/16″ -
5C STEP COLLET
tem No D L 561129 2″ 1″ 1-1/8″ 1-3/16″ 561130 3″ 561131 4″ 561132 5″ 561133 6″ -
5C EXPANDING COLLET SET
Body are precision ground and hardened. Soft head can be machined to specifications for holding on not only round but also square and hex. broached holes. Item No Machinable L (in) range D (in) 561121 0.250-0.468 1 561123 0.437-0.800 561125 0.570-1.437 561127 0.750-1.937 -
5C EMERGENCY COLLET
Face and pilot hole are soft to permit machining to your requireents. Item No Pilot Hole 561119 1/16″ -
5C COLLET BLOCK SET
Description Outside Size (in) Square For 5c Collets 1 3/4×1 3/4×2 3/4 Hex. For 5C Collets 1 3/4×1 3/4×1×3/4×2 3/4 Quick Acting, Lever Collet Closer 1 11/16×4 Complete Set-in Wood Case Consists of 1 Square Block. 1 Hex, Block and 1 Collet Closer. Item No. 561476 -
5C COLLET
Item No Clamping range 561113 Round Hole d 1-28mm 3/64″-1/8″ 561115 Hexagonal Hole H 3-22mm 1/8″-7/8″ 561117 Square Hole S 3-20mm 1/8″-3/4 -
PRECISION 3-JAW CHUCKS
Scroll type,chuck come with attached 5C back plate,2 set of solld jaws,chuck wrench. Shank 5C R8 MT2 MT3 MT4 MT5 Size Item No. Item No. Item No. Item No Item No Item No 80mm 571-010 571-026 571-040 571-054 571-070 571-086 100mm 571-012 571-028 571-042 571-056 571-072 571-088 125mm 571-016 571-032 571-046 571-060 571-076 571-092 130mm 571-020 571-036 571-050 571-064 571-080 571-096 D1(mm） 37.... -
4-JAW PLAIN BACK SELF-CENTERING CHUCK
Short cylindrical center mounting. The structure parameters of these chucks are the same as those of the k11 series. Suitable for processing square components and eight-edged components. Item NO. Model D1 D2 D3 H H1 h z-d 571211 K12 125 95 108 30 84 58 4 3-M8 571213 K12 160 130 142 40 95 65 5 3-M8 571215 K12 200 165 180 65 109 75 5 3-M10 571217 K12 250 206 226 80 120 80 5 3-M12 571219 K12... -
4-JAW INDEPENDENT FLAT BACK CHUCKS
Item NO. Model D1 D2 D3 H H1 h z-d 571101 K72 80 55 66 22 56 42 3.5 4-M6 571103 K72 160 65 95 45 93 65 5 4-M10 571105 K72 200 80 112 56 107 75 6 4-M10 571107 K72 250 110 130 75 120 80 6 4-M12 571109 K72 300 152 130 75 134 90 6 4-M12 571111 K72 400 160 185 125 143 95 8 4-M16 571113 K72 500 200 236 160 161 106 8 4-M20